What is Deep Drawing and How Does the Process Work

Deep drawing is an essential metal-forming process that transforms flat sheets of metal into intricate three-dimensional shapes. This technique is widely employed to produce a variety of hollow, cylindrical parts, including cups, cans, pots, and automotive components, where the depth exceeds the diameter.

The deep drawing process

consists of several critical steps:

Blanking: A flat sheet of metal, known as a blank, is precisely cut from a larger sheet to achieve the desired size and shape.
Drawing: The blank is positioned over a die with a cavity that corresponds to the desired final shape. A punch forcefully drives the blank into the die cavity, effectively stretching and bending it into the required form.
Redrawing: In many cases, multiple drawing operations are necessary to achieve the specified depth and shape. Redrawing involves passing the partially formed part through a series of dies, further refining its shape.
Trimming: Excess material is systematically trimmed from the formed part to ensure it meets the final specifications and dimensions.

Deep drawing stands out as a versatile and cost-effective manufacturing process capable of producing complex shapes with precise tolerances.

优势

The deep drawing process in sheet metal has the following advantages when manufacturing sheet metal parts in large production volumes.

Manufacture hollow cylindrical, rectangular, square, and other complex geometries
Low manufacturing /labor cost.
Less material consumption.
High productivity.
Highly precise parts.
High strength and minimum weight parts.
Low tool construction cost compared to progressive stamping tool

应用

Deep drawing parts can be used in a wide range of industries,
including:

Construction: Bending components for construction projects such as roofing and siding
Automotive: Bending sheet metal for use in body parts such as doors, hoods, and fenders
Aerospace: Bending sheet metal for use in the manufacturing of fuselage, doors, and fenders.
Advertising: Bending sheet metal for signage and advertising, including signs and billboards
Food processing: Bending sheet metal for beverages, kitchen equipment
Transportation: Bending sheet metal parts for cars, trains, buses, and aircraft
Art: Bending sheet metal for use in building cladding

Common Problems During the Deep Drawing Process

Deep-drawn sheet metal parts can exhibit several defects if deep-drawing part design guidelines are not followed or if the manufacturing process parameters are not properly set.

The following are common issues:

Wrinkling

Wrinkling defects appear in the vertical wall or flange of deep-drawn sheet metal parts due to high radial and tangential compressive stresses. This issue can be prevented through effective tool and process design.

Tearing and Thinning

Tearing and thinning occur in the inner section of the deep-drawn part as a result of high shank holder pressure, which restricts the free movement of the material, leading to elevated tensile stresses in that region. Additionally, tearing may occur due to a small corner radius.

Surface Defects

Surface defects, such as scratches and tool or die marks, can arise from a small clearance between the tool and die or inadequate lubrication.

Earing

Earing defects cause irregular features on the flange of deep-drawn parts and result from the anisotropic behavior of the material. By addressing these issues, manufacturers can improve the quality of deep-drawn components.

If you have any needs, contact us via email at Lynnyao@prototekparts.com 或致电+86-0792-86372550